what do i do about 103!

[Dynamics]

Well I read that it's a permissions problem, and it only happens after a specific windows update, mostly with a windows media centre OS.

A lot of people suggest installing into C:\ rather than C:\Program Files, since apparently permissions to Program Files is not working. Try this first as it is the easiest in my opinion.

Another possible solution I took from here:

http://forums.techguy.org/4811066-post5.html

I'll explain each step. Red is me.

Assuming your My Docs Folder and Game Folder are both on C:

1: Turn off 'simple file sharing'.
Quick copy paste from microsoft:

1. Click Start, and then click My Computer.
2. On the Tools menu, click Folder Options.
3. Click the View tab.
4. In the Advanced Settings section, clear the Use simple file sharing (Recommended) check box.
5. Click OK.

2: Get properties on C: and hit the Security tab.
Simple enough.

3: Remove everything in there.
Uncheck everything.

4: Click add and type Administrators then click Ok. (And nothing more unless you have a specific reason why)
Self-explanatory.

5: Make sure all the boxes below are checked to allow.
There will boxes underneath "Administrators" where you can check allow. This wll give full permissions to administrator again - which was the problem in the first place.

6: Click the Advanced Button.

7: At the bottom, click "Replace permission entries on all child objects..." so it has a tick.

8: Click ok, and on the box beneath, click ok on that too.

And another possible solution from the same guy, I'll explain it below using microsoft's procedure

Some people have resolved it by running an error check on thei r hard drives so you can attempt to repair any bad sectors.

Sourced from microsoft:
Manual steps to run Chkdsk at the command prompt

1. Click Start, and then Run.
2. In Open, type cmd, and then press ENTER.
3. Use one of the following procedures:
   • To run Chkdsk in read-only mode, at the command prompt, type chkdsk, and then press ENTER.
   • To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume:/f, and then press ENTER.
     
     Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
     Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.
   • To repair errors, locate bad sectors, and recover readable information, at the command prompt, type chkdsk volume:/r, and then press ENTER.
     
     Note If one or more of the files on the hard disk are open, you will receive the following message: Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
     Type Y, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

I can only hope one of these works for you. I can't guarantee a fix since I've never personally experienced the 103 error.